Fine Finish Carpentry & Millwork · Dallas–Fort Worth
Fine finish carpentry and millwork in DFW
Finish carpentry is the craftsmanship layer that separates a high-end renovation from a builder-grade one — the trim, panels, ceilings, stairs, and mantels that give a room its architecture. In DFW, crown moulding runs $8–$18 per linear foot installed, casing and baseboard $6–$14 per linear foot, wainscoting and wall paneling $10–$30 per square foot of wall, coffered ceilings $25–$55 per square foot, box-beam ceilings $30–$70 per linear foot, built-in shelving $2,500–$15,000+, custom stairs and railings $8,000–$30,000+, and mantels $1,200–$6,000+. TrueForm Remodeling designs and installs paint-grade and stain-grade millwork built to the home, matched to existing profiles, and sequenced with our cabinetry so every reveal and finish lines up. One crew handles layout, fabrication, install, and finish across Dallas, Plano, Frisco, Southlake, McKinney, Allen, Richardson, Carrollton, Grapevine, and Prosper.
What we build
- Trim, casing, and baseboard — clean or profiled, paint- or stain-grade
- Crown moulding, including stacked and lit-cove profiles
- Wainscoting, board-and-batten, and raised or flat-panel walls
- Coffered and beamed ceilings sized to the room grid
- Built-in shelving, library walls, and media surrounds
- Fireplace mantels and full surrounds
- Custom stairs, railings, newel posts, and skirt boards
What's included
- On-site measurement and profile matching to existing woodwork
- Material selection: paint-grade poplar and MDF, or stain-grade hardwood
- Layout, fabrication, and coped, scribe-fit installation
- Filling, sanding, caulking, and prep for paint or stain
- Coordination with cabinetry so reveals and finishes align
- Final walkthrough and touch-up
Pricing ballpark
Crown moulding installed: $8–$18 per linear foot. Casing and baseboard: $6–$14 per linear foot. Wainscoting or wall paneling: $10–$30 per square foot of wall. Coffered ceiling: $25–$55 per square foot. Box-beam ceiling: $30–$70 per linear foot. Built-in shelving: $2,500–$15,000+. Custom stairs and railings: $8,000–$30,000+. Mantel and surround: $1,200–$6,000+. Stain-grade hardwood and taller ceilings sit at the top of each range.
Frequently asked
How much does finish carpentry cost in DFW?
Installed ranges in DFW: crown moulding $8–$18 per linear foot, casing and baseboard $6–$14 per linear foot, wainscoting or wall paneling $10–$30 per square foot of wall, coffered ceilings $25–$55 per square foot, box-beam ceilings $30–$70 per linear foot, built-in shelving $2,500–$15,000+, custom stairs and railings $8,000–$30,000+, and mantels $1,200–$6,000+. Profile complexity, ceiling height, and paint-grade versus stain-grade material move the number within each range.
What materials do you use for millwork and trim?
Paint-grade work is run in poplar and moisture-resistant MDF for crisp painted profiles. Stain-grade work uses solid white oak, walnut, maple, or cherry to match existing woodwork or a new finish. Stair treads, handrails, mantels, and load-bearing beam wraps are built from solid hardwood. We match reveals and profiles to the home's existing trim so new millwork reads as original.
How long does a finish-carpentry project take?
Crown and casing in a single room: 2–4 working days. Wainscoting or board-and-batten in one room: 3–5 days. A coffered or beamed ceiling: 4–8 days depending on grid size and finish. A custom stair and railing rebuild: 1–3 weeks including fabrication and on-site fitting. Painted work adds prime and finish coats between milestones.
What features and rooms do you build?
Trim, casing, and crown throughout; wainscoting and raised or flat panel walls in dining rooms, entries, and stairwells; coffered and beamed ceilings in great rooms and studies; built-in shelving and media walls in libraries and living rooms; fireplace mantels and surrounds; and custom stairs, railings, and newel posts. Anywhere a room needs a defined edge or a focal wall is finish-carpentry work.
Do you take on smaller finish projects, or only whole-home millwork?
Yes to smaller projects. A single mantel, one room of crown moulding, a stair-railing refit, or a built-in bookcase are all welcome. Many finish-carpentry jobs start as one room and grow into a whole-home millwork package once the first room is finished — we scope each phase so it stands on its own.
Does finish carpentry pair with your cabinetry work?
It's designed to. We sequence millwork with cabinetry so crown returns, scribe lines, panel reveals, and finish colors align across built-ins, wall paneling, and trim. Running both under one crew is how a kitchen, library, or study reads as a single designed room rather than parts installed by different trades. See our custom cabinetry service for the case-goods side.
Why TrueForm for DFW finish carpentry
Finish carpentry is where a renovation is judged up close — the miter that stays tight, the reveal that holds a constant line, the panel grid that centers on the room. We build paint-grade profiles in poplar and MDF and stain-grade work in solid white oak, walnut, maple, or cherry, matched to the home's existing woodwork so new millwork reads as original. Coffered and beamed ceilings are laid out to the room, not to a stock kit, and stairs and railings are fabricated to the actual run rather than adapted from parts. Because the same crew runs our cabinetry, crown returns, scribe lines, and finishes carry across built-ins, paneling, and trim as one designed surface. We anchor whole-home millwork packages — libraries, studies, stair halls, and great rooms typically run well past $10,000 — and we take on single-room and single-feature work too; the first mantel or one room of crown is often how a larger package begins.
Get a finish-carpentry quote
Same-day response. We measure on-site, talk through profiles, materials, and finishes, and quote in writing.