Windows & Doors · Dallas–Fort Worth
Window and door replacement in DFW
Our premium tier is European triple-glazed, passive-house-grade windows and doors — three panes, multi-chamber frames, and the best insulation and acoustics on the market, supplied and installed by TrueForm. Alongside them we install trusted US brands led by Pella, plus Andersen, Marvin, and Jeld-Wen. Window replacement in DFW runs $650–$1,400 per window installed for mid-grade vinyl, $1,200–$2,500 for fiberglass or composite, and $1,800–$4,500+ for premium clad-wood and European triple-glazed lines. A typical 25-window full-house replacement lands between $18,000 and $50,000. Entry doors installed run $1,500–$8,500+ depending on material; patio sliders run $2,800–$12,000+. Every product carries ENERGY STAR ratings tuned for the South-Central climate zone — U-factor 0.30 or lower, SHGC 0.25 or lower — and a 3-year workmanship warranty on every job across Dallas, Plano, Frisco, Southlake, McKinney, Allen, Richardson, Carrollton, Grapevine, and Prosper.
Premium tier: European triple-glazed windows and doors
For homeowners who want the best possible energy performance, TrueForm supplies and installs European triple-glazed windows and doors built to passive-house standards — three panes of glass, two insulating gas gaps, warm-edge spacers, and multi-chamber frames. The result is markedly lower heat transfer, a quieter interior, and a tighter long-term seal than a standard double-pane unit. We supply and install Drutex European triple-glazed windows and doors, engineered and manufactured in the EU to those energy standards.
Trusted US brands, led by Pella
When a project calls for a US-made line, we lead with Pella — broad style range, strong warranty, and Low-E packages tuned for cooling-dominant climates. We also install Andersen, Marvin, and Jeld-Wen. Whichever line you choose, the ENERGY STAR targets for the South-Central climate zone (U-factor 0.30 or lower, SHGC 0.25 or lower) are the floor on every quote.
What's included
- On-site measurement and product selection
- Removal of existing window or door and disposal
- Install with flashing tape, sill pan where required, and full perimeter caulk
- Insulating foam at jamb gaps
- Interior trim repair or replacement
- Exterior trim, brick mold, or stucco patch as needed
Pricing ballpark
Mid-grade vinyl window installed: $650–$1,400. Fiberglass or composite: $1,200–$2,500. Premium clad wood: $1,800–$4,500+. Full 25-window house: $18,000–$50,000. Fiberglass entry door: $2,200–$4,500. Steel entry door: $1,500–$3,200. Solid wood entry: $3,500–$8,500+. Patio sliders: $2,800–$12,000+ depending on material and size.
Frequently asked
What are European triple-glazed windows, and why are they the premium option?
European triple-glazed windows and doors carry three panes of glass with two insulating gas gaps, warm-edge spacers, and multi-chamber frames engineered to passive-house energy standards. Compared with a standard double-pane unit, they cut heat transfer and outside noise dramatically and hold a tighter seal. TrueForm supplies and installs this category as our premium tier for DFW homes chasing the best possible insulation and acoustics. Expect $1,800–$4,500+ per window installed depending on size and configuration.
How much does window replacement cost in DFW?
Installed window replacement in DFW runs $650–$1,400 per window for mid-grade vinyl (Pella 250, Andersen 100 series), $1,200–$2,500 for fiberglass or composite (Pella Impervia, Andersen 400), and $1,800–$4,500+ for premium clad wood (Marvin Elevate, Andersen E-Series). A typical 25-window full-house replacement lands $18,000–$50,000.
How much does an entry door cost installed?
Fiberglass entry doors installed: $2,200–$4,500. Steel entry doors: $1,500–$3,200. Solid wood entry doors: $3,500–$8,500+. Patio sliders: $2,800–$6,500 vinyl, $4,500–$12,000+ aluminum-clad wood. Pricing includes removal, install, weatherstripping, and exterior trim.
Do I need a permit for window or door replacement?
Like-for-like window or door replacement in the existing opening typically does not require a permit in Dallas, Plano, or Frisco. Resizing an opening, adding a new opening, or replacing structural egress windows does require a permit and inspection. We confirm permit requirements with your municipality before scheduling.
What U-factor and SHGC should I look for in DFW?
DFW falls in the South-Central climate zone. ENERGY STAR-certified windows here need a U-factor of 0.30 or lower and a Solar Heat Gain Coefficient (SHGC) of 0.25 or lower. Low-E coatings tuned for cooling-dominant climates (e.g., Andersen SmartSun, Pella SunDefense Low-E) cut summer load significantly.
How long does a full-house window replacement take?
A 25-window full-house replacement runs 3–5 working days with a crew of 4. We do interior trim repair the same week. Single-day installs are possible for 6–10 window jobs.
Why TrueForm for DFW windows and doors
Window replacement is a weatherproofing job as much as a product install. We pull existing windows back to the rough opening, install flashing tape on the sill and jambs in the right sequence, set a sill pan where the unit needs one, and finish with full perimeter caulk on the exterior and low-expansion foam at the jamb gap. ENERGY STAR ratings for the South-Central climate zone (U-factor 0.30 or lower, SHGC 0.25 or lower) are the minimum on every quote — we'll talk through where it makes sense to go tighter. Interior trim repair and exterior brick-mold or stucco patching are included in the install scope. Manufacturer warranties from Andersen, Pella, Marvin, and Jeld-Wen pass through to you at handoff.
Get a windows or doors quote
Same-day response. We come measure, talk through product lines and efficiency ratings, and quote in writing.